Your Bissell vacuum brush works hard to keep your floors spotless, but over time, dirt, hair, and debris can get tangled in the bristles. If you don’t clean it regularly, your vacuum won’t work as well, and your cleaning routine will take longer.
You might even notice your vacuum making strange noises or losing suction. Don’t worry—cleaning your Bissell vacuum brush is easier than you think. You’ll discover simple, step-by-step tips to get your brush looking and working like new again. Keep reading to save time, improve your vacuum’s performance, and enjoy cleaner floors every day.
Tools Needed
Cleaning the Bissell vacuum brush needs a few simple tools. These tools help remove hair, dust, and debris from the brush. Using the right tools makes the process faster and easier.
Gather these items before starting. It saves time and keeps the cleaning smooth.
Scissors Or A Small Knife
Scissors or a small knife cut hair and threads wrapped around the brush. Use them carefully to avoid damage to the brush or yourself.
Soft Brush Or Old Toothbrush
A soft brush or old toothbrush helps scrub dirt and dust from the bristles. It reaches into tight spaces for a thorough clean.
Microfiber Cloth
A microfiber cloth wipes away dust and cleans the brush surface. It traps dirt without scratching the parts.
Compressed Air Can
Compressed air removes dust and small particles from hard-to-reach areas. It helps clean without touching delicate parts.
Gloves
Wearing gloves protects your hands from dirt and sharp objects. It also keeps the brush clean from oils on your skin.
Removing The Brush Roll
Removing the brush roll from your Bissell vacuum is important for deep cleaning. It helps clear hair, dust, and debris stuck around the brush. This keeps your vacuum working well and your floors clean.
Follow these easy steps to remove the brush roll safely. You will need no special tools, just a little care and patience.
Turn Off And Unplug The Vacuum
Always unplug the vacuum before starting. This prevents accidents and keeps you safe. Never try to remove the brush roll with the vacuum on.
Lay The Vacuum On Its Back
Place the vacuum on a flat surface. Lay it down so you can see the bottom clearly. This makes removing the brush roll easier and safer.
Locate The Brush Roll Cover
Look for the cover that holds the brush roll in place. Usually, it is secured by clips or screws. Check your vacuum manual if unsure.
Release The Cover
Use your fingers or a screwdriver to open the cover. Remove any screws carefully and keep them safe. Gently lift the cover off to expose the brush roll.
Remove The Brush Roll
Pull the brush roll out slowly. Some models have end caps to remove first. Avoid using force to prevent damage. Set the brush roll on a clean surface for cleaning.
Clearing Debris And Hair
Clearing debris and hair from your Bissell vacuum brush is essential. It keeps the vacuum working well and helps clean your floors better. Dust, hair, and small debris often get stuck on the brush roll. This can slow down the vacuum or cause it to stop spinning.
Regular cleaning of the brush roll prevents damage and ensures strong suction. This section shows easy steps to remove hair and debris safely and quickly.
Remove The Brush Roll
First, unplug the vacuum for safety. Locate the brush roll cover on the bottom. Use a screwdriver or release buttons to open the cover. Carefully take out the brush roll. This gives clear access to all trapped debris.
Use Scissors To Cut Hair
Hair often wraps tightly around the brush roll. Use small scissors to cut through hair tangles. Cut carefully to avoid damaging the bristles. Pull out the loose hair with your fingers or tweezers. Repeat until all hair is removed.
Clear Stuck Debris
Remove bits of dirt, string, and other debris stuck on the brush. Use a soft brush or cloth to wipe the roll clean. Check inside the brush housing for any hidden debris. Cleaning here improves brush roll spinning.
Reassemble And Test
After cleaning, place the brush roll back into the vacuum. Close the cover securely. Plug in the vacuum and turn it on. Watch the brush roll spin smoothly without noise. Your vacuum is now ready to clean better.
Washing The Brush Roll
Washing the brush roll of your Bissell vacuum is important for good cleaning. Dirt, hair, and dust can get stuck on the brush. This makes the vacuum less effective. Cleaning the brush roll keeps your vacuum working well for a long time.
Careful washing removes buildup gently without damage. Use simple household items like soap and water. Follow easy steps to keep the brush roll clean and fresh.
Using Water And Mild Soap
First, remove the brush roll from the vacuum. Check the manual if unsure how to do this. Use warm water and mild soap to clean the brush. Avoid strong chemicals that can damage the bristles. Gently scrub the brush roll with a soft cloth or sponge. Focus on areas with stuck dirt and hair. Rinse the brush roll thoroughly with clean water. Make sure no soap remains on the brush.
Drying Techniques
After washing, dry the brush roll completely. Use a clean towel to remove extra water. Let the brush roll air dry in a warm place. Avoid direct sunlight or heat sources. This can warp or damage the brush roll. Do not put the brush roll back until fully dry. Moisture can cause mold or damage the vacuum motor. Drying well keeps your vacuum safe and working well.
Cleaning The Brush Housing
Cleaning the brush housing of your Bissell vacuum keeps it working well. Dirt, hair, and dust can get stuck inside. This can block the brush and reduce suction power. Regular cleaning helps your vacuum last longer and clean better.
Focus on the brush housing area. This is where most debris collects. A clean brush housing means your vacuum can pick up dirt easily. It also stops the brush from getting stuck or damaged.
Remove The Brush Roll
Start by unplugging the vacuum for safety. Find the brush roll cover on the bottom. Use a screwdriver if needed to open it. Gently lift out the brush roll. Set it aside on a clean surface.
Clear Debris From The Housing
Look inside the brush housing. Use your hands or a soft cloth to remove hair and dust. A small brush or an old toothbrush works well here. Remove all dirt from corners and edges. Make sure no debris is stuck inside.
Wipe The Housing With A Damp Cloth
Take a damp cloth or sponge. Wipe the inside of the brush housing clean. Avoid using too much water to protect the vacuum parts. Dry the area with a soft cloth. Ensure the housing is completely dry before reassembling.
Reassemble The Brush Roll
Place the brush roll back into the housing. Align it correctly with the slots. Close the brush roll cover securely. Tighten any screws you removed. Check that the brush roll spins freely before use.
Reassembling The Vacuum
Reassembling the vacuum after cleaning the Bissell brush is a key step. It ensures your vacuum works well and lasts longer. Take your time to put all parts back correctly. This helps avoid damage and keeps the vacuum running smoothly.
Aligning The Brush Roll
Start by placing the brush roll in its slot. Make sure the ends fit into the holders. The brush should spin freely but stay secure. Check the direction of the brush bristles to match the original setup.
Securing The Brush Cover
Next, put the brush cover back in place. Align it with the vacuum base. Press down gently until it clicks or locks. This cover keeps the brush roll protected and in position.
Reattaching The Belt
Slide the belt over the motor shaft and brush roll. The belt must be tight but not stretched. A loose belt can cause poor brush movement. Adjust the belt before closing the vacuum.
Closing The Vacuum Housing
Close the vacuum housing carefully. Check that no wires or parts get caught. Fasten screws or latches to secure the housing firmly. This step completes the reassembly and prepares the vacuum for use.
Maintenance Tips
Keeping your Bissell vacuum brush clean is key to its performance and lifespan. Regular maintenance helps avoid clogs and keeps the brush spinning smoothly. Simple steps can save you time and money by preventing damage.
Regular Cleaning Frequency
Clean the brush after every 2 to 3 uses. Hair and debris build up fast on the bristles. Check the brush roll for any tangled threads or dirt. Remove these gently to stop blockages. Doing this often keeps suction strong and the brush working well.
Avoiding Common Issues
Never use sharp tools to clean the brush roll. They can damage the bristles or belt. Use scissors carefully to cut hair or string wrapped around the brush. Avoid letting debris sit too long; it can harden and become tough to remove. Keep the brush dry to prevent mold and bad smells.
Frequently Asked Questions
How Often Should I Clean My Bissell Vacuum Brush?
Clean your Bissell vacuum brush every 1-2 months. Frequent cleaning ensures optimal suction and prevents hair buildup. For heavy use, clean more often to maintain performance and extend brush lifespan.
What Tools Do I Need To Clean Bissell Vacuum Brush?
You need scissors, a soft brush, and a damp cloth. Scissors help remove tangled hair. The soft brush clears debris, and the cloth cleans dust from the brush roller.
Can I Wash The Bissell Vacuum Brush With Water?
Yes, you can wash the brush with water. Remove it from the vacuum first. Use mild soap and water, then air dry completely before reinstalling to avoid damage.
How Do I Remove Hair From Bissell Vacuum Brush?
Use scissors or a seam ripper to cut through tangled hair. Gently pull hair away from the brush bristles. Regular removal prevents brush blockages and maintains cleaning efficiency.
Conclusion
Cleaning your Bissell vacuum brush keeps it working well. Dirt and hair can slow it down or cause damage. Regular cleaning helps your vacuum pick up dirt better. Take a few minutes to remove debris after each use. This simple step saves time and money on repairs.
Your floors will stay cleaner with a fresh brush. A clean vacuum brush means a healthier home too. Keep up the routine and enjoy better cleaning results every day.